FORCED SOLAR THERMAL SYSTEM 200L BONYSOL

Solar thermal energy collection equipment with forced circulation operation, with an inter-accumulation tank for DHW with a serpentine in stainless steel 316 (Sanitary Hot Water) of 200 liters liters, and with 1 panel of 20 vacuum tubes (a total of 20 tubes ) type SUPER HEAT PIPE.

The entire kit is from the brand BONYSOL Sustainable Alternatives.

 Forced (closed) system with internal coil
• The collector and the accumulator are separated, this allows that both elements agree perfectly with the architecture
• Closed system with internal coil for optimal water distribution and better operation in extreme temperatures
• Vacuum tube collectors with ‘heat pipe’ technology

Bonysol forced equipment are complete kits that carry - collectors, structures, pumps, controllers, tanks, etc. - for the generation of Domestic Hot Water.

If the house does not have an alternative system for generating hot water, the tank is provided with an internal resistance that will be activated by the controller in the event of an occasional increased demand for hot water (the electrical resistance is optional).

What can be obtained with a forced system?
These systems achieve very high annual energy savings.

For example, you can get hot water for domestic or industrial consumption, or to heat our homes, hotels, schools, factories, etc. We can even heat the pools and allow bathing for much of the year.

Another advantage of the forced system is that the accumulator is installed under cover, which reduces energy loss and greater performance in winter times.

This system allows hot water to be available from the first hour of the morning. It is ideal for sanitary hot water applications in single-family homes by offering the highest energy performance, easy installation and minimal maintenance.

Solar Collectors: Vacuum tubes with heat-pipe technology
• Satisfaction on both sides. It is called "Inexhaustible Energy"
• The equipment (collector) takes up little space and provides high performance for water heating in restaurant kitchens, buildings and saves you money
• This system is tested worldwide: flats, houses, restaurants, hospitals and offices

BONYSOL has the most advanced system in vacuum tubes called super Heat Pipe. The vacuum tubes carry a vaporizing fluid that cannot escape from inside the tube and works as a heat carrier. This fluid evaporates under the effect of solar radiation and rises to the upper end of the tube, which is at a lower temperature. This causes the steam to condense, yield its energy and return to its liquid state, falling by gravity to the bottom of the tube, where upon receiving more radiation, it evaporates again and a new cycle begins.

Bonysol collectors, with 'heat pipe' technology vacuum tubes, are high performance intended for all kinds of solar applications with the closed circuit under pressure. To achieve higher performance, it is possible to connect them in series or in a serious-parallel connection. Casual damage to a thermal tube does not interrupt the activity of the entire solar system.

Thanks to the help of Bonysol,

Practically any type of solar application is possible, from DHW systems to complex systems combined with hot water for domestic use, underfloor heating and pool heating.
Its high efficiency manages to provide hot water after a few hours of sun.
This is the environmentally positive response to a family's hot water needs.

The latest technology and performance characterize the range of collectors that Bonysol makes available to its customers.
Bonysol collectors stand out for their high performance and good finishes, certified by the most demanding laboratories in Europe, thus ensuring optimum results and minimal maintenance.

Currently the pipettes of the "Heat Pipe" tubes that are inserted into the collector head are not made of copper, but are made of an alloy with part of platinum, nickel, zinz and other materials that favor thermal conduction, thus making it unnecessary the use of any thermal grease.

Some Remarkable Advantages of Bonysol Vacuum Tube Solar Panels,
• Ideal for heating and large installations (Hotels, spas, buildings, sports centers, hotels) as its performance is much higher and it reaches higher fluid temperatures
• Much more aesthetic
• Simple maintenance because the tubes can be changed without emptying the circuit
• They allow reaching high temperatures even in unfavorable climate areas
• Minimum assembly cost, thanks to the simplicity of the system
• Geometry, its round shape makes better use of radiation in the early and late hours of the day
• The water does not go through the tubes; in case of